Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, if windows with double glazed window repairs near me panes are secured by internal beading it will be more difficult to remove the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is substantial, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

upvc window repair windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the mechanism of the handle wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need close the window and perform an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with the breeze. These are easily repaired by any skilled DIYer and are usually done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change a window hinge but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also become disaligned as a result of wear, creating a gap where the sash meets frame. If they're beyond repair, it may be required to realign them. Second, the interlock can also become misaligned. This is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace them.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.