Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window repair near me panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the distance between the window and the door is large, you might need to consider a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as you can to ensure that your upvc window repair near me windows are watertight and draught-proof.

upvc window repair near me handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window repairs near me is an easy process but it can be easier to do if you have someone to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to give assistance.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also be disaligned as a result of wear, causing gaps where the sash and frame meet. They can be fixed by giving them a good clean, but if they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can also become misaligned. It is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.