UPVC Door Handles Replacement Guide

Replacing the handles on your doors made of upvc is a simple DIY project once you have the proper measurements. These measurements include the distance between the backplate of the handle's fixing centres (sometimes referred to as PZ) and the centre of the key hole.

The most common type of uPVC door handle is one with two inline levers both internal and external connected by a spindle. They are used to operate the multipoint lock that is found on uPVC and aluminium doors, as well as some wooden doors.

Brands and finishes

A damaged uPVC door handle can be more than an inconvenience. It could also leave your home vulnerable to intruders who may be able to break the lock and gain entry into your home. This is the reason it's essential to recognize when your uPVC door handles are beginning to break down and take action as soon as you can.

It's quite simple to replace your uPVC door handles. You'll need a few tools and a few accurate measurements. In most instances, you'll just need to install your new uPVC handles and you'll be ready to go. It is always recommended to select locks and handles that are of the highest standard of security.

There are a number of different types of uPVC handles on the market that you can choose from. These include lever/lever, pads handles, offset and snib. Lever/lever handles are popular with homeowners and are comprised of two inline handles that can be moved. Pad uPVC handle are smaller and come with an offset design. This allows you to secure the outside of your house after entering.

A uPVC offset handle consists of two pads one fixed and the second one movable. This kind of handle can be found on sliding patio doors. Snib handles resemble offset handles but they can be utilized on uPVC french doors.

When selecting a replacement uPVC door handle, you should consider the style of your current windows and doors. The handle should match your existing doors in terms of colour and style. Some handles come in a range of finishes that include black and white as well as others that are available in more stylish options like gold or chrome.

It is crucial to make sure that you get your screw-to-screw as well as PZ measurements right when you're taking measurements. The PZ measurement is the distance between the middle of the spindle hole and the centre keyhole. The screw-to-screw dimension is the distance between the screw hole on the existing handle and the nearest screw on your door frame and it is crucial to measure this accurately to identify a suitable replacement.

Measurement and Fitting

A uPVC door handle comes with two levers, one on each side of the lock mechanism permitting easy operation both inside and out. Offering a comfortable grip as well as easy-to-use functionality they are an essential part of the door's security mechanisms. With the correct uPVC handles, you'll be able to ensure that your door is safe and stylish at the same.

Choosing the correct uPVC handle can be difficult and confusing because there are many different sizes, shapes and styles available. When selecting a replacement handle for your uPVC door, you should be aware of three crucial measurements. These are the backplate fixing centers key hole, lever and lever size, and the spindle's size. Incorporating these factors will ensure that the new handle fits your uPVC door and gives you an perfect fit.

Measuring these points is relatively straightforward, but you should be as precise as you possibly can. If you're not careful, you could end having the wrong handle to fit the existing one and could cause issues when opening your uPVC door. The most important measurement is the top screw that is on the backplate's fixing centre, often referred to as the PZ size. This is the distance between the handle lever or axis of the keyhole and the center of the screw. This is usually 92mm however, it could be different.

It is also important to ensure that your uPVC door handles have the number of keyspindles required to operate your multi-point locking system. It is ideal that they be in line with the number of keys that you use to lock and unlock your uPVC doors. Some older doors have a single spindle for the lock. More modern doors have two spindles that allow independent operation both indoors and outdoors.

You shouldn't have a hanging uPVC handle, as this can put a lot of strain on the locking mechanism. This could lead to broken components. To avoid this, look for a set of uPVC door handles that have built-in spring cassettes. These aren't just aesthetically pleasing but they reduce the pressure that operates on the door locking mechanism and could give it a much longer lifespan.

Broken Spring Cassettes

A problem with the tubular latch could cause a stiff door handle. It is usually a straightforward fix that can be achieved by repositioning the replacement handle's fixing plates inside the handle. Open the door and check there aren't any obvious obstructions such as loose screws, or indications that internal components are protruding through the latch plate. If this isn't the case, it could be one of the spring cassettes in your uPVC handle that may need to be moved.

The easiest way to do this is to buy the door handle repair kit. The kit will come with all the tools needed to remove the handles and then reposition the cassettes. Follow the steps to complete the procedure and you'll soon have a sagging / sliding uPVC door handle that is once again fully functional.

A floppy uPVC door handle could be the result of thermal contraction, but is more commonly an indication that the gearbox inside has been damaged. This isn't something that you can fix at home, but it will require the help of a locksmith expert.

It is crucial to select a genuine replacement gearbox to your uPVC doors. This will ensure that everything is properly installed. If you use a less expensive aftermarket part, it could result in issues like a malfunctioning multipoint lock or less security for your home.

You could also replace upvc door handle the entire uPVC lock and handle mechanism. This will not only resolve the sagging issue but also ensure that the handle is fully functional and secure. This is not an inexpensive or quick solution. It requires the removal of the old uPVC handles and replacing them with a new handle. This is only applicable to double-glazed doors that have sprung handles, since the door will need to be repaired. If you want a faster and less expensive option you can always purchase a new set of handles that come with built-in springs that will eliminate the need to drill the doors.

Can I put a uPVC door handle on an aluminium or timber door?

When you are choosing doors for your home, there are many factors to consider. Aluminum doors are contemporary and attractive and uPVC provides durability, security and energy efficiency. In terms of the style of door you're looking to install the correct handle is essential. If you are looking to replace your old handles or even add new ones, it's essential to choose the right ones for your property. Our uPVC door handle replacement guide will assist you in making the right decision and install them with confidence.

The process of changing a upvc windows handles door handle is relatively simple and requires only a few tools. First, you'll have to remove the current handle. It is possible to remove the screws holding it in place by using a screwdriver. After the screws have been removed, you can take the handle out of the door.

The next step is to measure the door handle. You will need to locate the middle of the fixing holes on the backplate. This is commonly known as the PZ measurement. It is used to determine the handle spindle size. Once you have this information, you will be able to purchase a door handle replacement that is the right size.

There are many kinds of uPVC handles to suit your needs. Some of them are designed to provide extra security features, such as anti-drill, cylinder guards, and mole grips. These uPVC handles can be installed on upvc chrome door handles doors and aluminium and wood ones. They are ideal for those looking to enhance the security of their home.

If you are looking for a more traditional uPVC handle, there are also options to suit your taste. They are available in various finishes, including gold, black, and chrome. They are typically a little more expensive than standard handles however they will provide an attractive finish to your door.

After you have selected a suitable uPVC door handle, it is essential that you check the dimensions before ordering. You will need to take the measurements above including the lever and key hole dimensions, as well as the backplate fixing centres to make sure that the new handle is a suitable match for your door.